| Brand Name: | HongCe |
| Model Number: | HH0804T |
| MOQ: | 1 set |
| Price: | Negotiation |
| Payment Terms: | T/T,L/C |
| Supply Ability: | 100 sets per month |
The hose test is the clause that surprises people. IPX4 passes, the sample looks dry, and then the IPX5 jet at a 12.5 mm nozzle distance finds the one cable gland that was never tightened. This water jet hose nozzle test equipment lets you run clauses 14.2.5 and 14.2.6 exactly as written, with the specified nozzle bore, the specified flow, and the specified distance held by a mechanical positioning arm instead of a technician's arm.
Our customers buy this rig for one of two reasons: they are preparing an enclosure for a notified body report and want to arrive with data, or they are a test house that has to produce the same jet every day for different samples. The design answers both cases, because the nozzle station, flow loop, and sample turntable are independent of the operator's skill.
| Standards | IEC 60529:1989+AMD1:1999+AMD2:2013 clause 14.2.5 and 14.2.6, GB/T 4208 |
|---|---|
| Nozzle bore | Φ6.3 mm for IPX5, Φ12.5 mm for IPX6, both supplied as standard |
| Flow rate | 12.5 L/min ±5% (IPX5), 100 L/min ±5% (IPX6) |
| Jet distance | 2.5 to 3.0 m, set by a graduated positioning arm |
| Test duration | At least 3 minutes per square metre, 1 minute minimum, programmable |
| Flow control | Electromagnetic flow meter plus proportional valve, closed loop |
| Pump | Stainless steel multistage centrifugal pump, 3 kW |
| Controller | PLC with 7 inch touch screen, separate IPX5 and IPX6 recipes |
| Water reservoir | 500 L stainless tank with filter and level switch |
| Frame | 304 stainless steel, mobile on castors with levelling feet |
| Power supply | AC 220 V 50/60 Hz single phase or AC 380 V three phase, 4 kW (110 V available) |
| Footprint | Approx. 3200 x 1600 x 1800 mm, weight 450 kg |
A jet test is easy to build and hard to make repeatable. Three design decisions do most of the work here.
The turntable can be rotated manually through the recommended positions or driven continuously, and the sample can be energised during the test through a sealed cable pass-through, so you can watch for a lamp flicker or a fault trip while the jet is running.
| Comparison item | HongCe jet rig | Entry-level jet benches | European lab brands |
|---|---|---|---|
| Flow stability under load | Closed loop, compensated for filter loading | Fixed pump, flow falls during the run | Closed loop, comparable |
| Nozzle interlock | Recipe locked to nozzle, mismatch refuses start | None | Usually present |
| Jet distance control | Rail with scale and clamp | Handheld hose, distance varies | Rail, comparable |
| Nozzle supply | 6.3 and 12.5 mm both standard, spares in stock | One size, spare on request | Both, long lead time |
| Service | Remote diagnosis within one working day | Email only | Regional agent ticket queue |
| Budget level | Middle of the range, roughly half of European list | Lowest | Highest |
Yes. Both nozzles are standard, and the recipe sets flow, nozzle, and duration. Only the nozzle swap is physical, and the machine checks it.
Both are possible. Mains feed needs at least 0.15 MPa and 120 L/min available at the inlet. Most labs choose the tank because it buffers the flow and lets the water be filtered and reused.
The turntable sits over a collection tray that returns water to the tank through a screened drain. A 50 mm drain outlet is provided for overflow, and we recommend a floor channel in the installation drawing we send before delivery.
Yes, the standard requires 2.5 to 3.0 m from the nozzle to the surface of the enclosure. The rail scale reads that distance directly, and the positioning arm sets the jet angle.
20 to 25 days for the standard configuration. Three-phase and 110 V versions may add 5 days.
Yes. Many customers pair this jet rig with an oscillating tube machine on a shared frame or place them side by side. We can quote a combined water test area with one control cabinet.
Guangzhou HongCe Equipment Co., Ltd started in 2003 as HongTong Electromechanical and has grown into a specialist supplier of electrical safety and materials test equipment for appliance, lighting, cable, and EV accessory manufacturers. Our engineers work from the standard text, not from a competitor's catalogue, which is why we can explain every dimension on the drawing you receive with the quotation.
Roughly two thirds of our machines are exported, with laboratories in Germany, Poland, Turkey, India, Vietnam, Thailand, Brazil, and Mexico using HongCe rigs in daily work. Technical questions are answered by the people who assembled the unit.