Thanks for the delivery and of course for the equipment itself.
The shipment went well and the test-equipment is now here and ready to be used (see picture).
First impression is very good and installation as well as first test run were successful.
Even the swiss plug has been assembled at the power cord. :-)
—— Mr. Martin Kaempf
Thanks for your e-mail!
Yes, we received the Impact hammer 2 days ago! It seems to working well ;)
If there are any further requests, by our side, we will contact you again!
—— Dirk Fleischer
Shipment and delivery went without issue. Equipment is well-constructed and professional looking.
It performs as specified.
Thank you for all of your help, it was a pleasure working with you.
—— Brian Schroeder
Dear Lily,Thanks for your mail and follow-up!Yes, the products are fine, thanks!Have a nice weekend
IEC60884-1 Plug Socket Tester Temperature Rising Tester 0-125A Testing Current For this test, the temperature rise is measured on the terminals. The plug shall be tested in a draught-free environment at the ... Read More
IEC60884-1 Apparatus For Verification of Maximum And Minimum Force Equipped With Test Plugs 22 Force necessary to withdraw the plug The construction of accessories shall allow the easy insertion and withdrawal ... Read More
IEC60669-1 Switch Plug Socket Endurance Tester And Load Bank Set, 6 Stations Introduction: The plug and socket endurance testing machine is designed according to the requirements of the corresponding clauses ... Read More
IEC60884-1 Plug Socket Tester Temperature Rising Tester 0-125A Testing Current Standard: IEC 60884-1 2013 clause 19, IEC 60998.1, VDE0620 Application: This device is use for test the temperature rise under ... Read More
IEC60884-1 Straight Unjointed Test Finger, Diameter 12mm, Protection Against Electric Shock Test During this additional test the accessories are subjected for 1 min to a force of 75 N, applied through the tip ... Read More
IEC 60884-1 Power Cord Flexing Tester 10-60rpm Flexing Rate 6 Working Stations Standard: IEC 60884-1 2013 clause 23.4 and figure 21, UL817, VDE0620 Application: This device is used for test the flexing ... Read More
IEC60884-1 Switch and Plug - Socket Endurance Tester With Liner and Rotating Station Product Introduction Plug Socket Tester The test machine is designed and manufactured according to IEC60884-1clause 20 and 21 ... Read More
Digital Display Screwed Gland IEC 60884-1 For Torque Resistance Strength Tester 26 Rods Product Introduction The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed ... Read More
IEC60884 Plug Pins Insulating Sleeves Abnormal Heat Resistance 20mm Brass Button Operation Tester Standard: IEC 60884-1 2013 clause 28.1.2 and figure 40 Application: This device is use for testing resistance to ... Read More
Device For The Temperature Rise Test Of IEC60884-1 Clause 19 Figure 44 high-precision 6 stations Standard:IEC60884-1 Plugs and socket-outlets for household and similar purposes – Part 1:General requirements ... Read More