Place of Origin: | China |
Brand Name: | HongCe |
Certification: | TUV、ITS、CSA、BV、SGS 、CNAS(cost additional) |
Model Number: | SN-2 |
Minimum Order Quantity: | 1 set |
---|---|
Price: | Negotiable |
Packaging Details: | Plastic Tool Box |
Delivery Time: | 7 Days |
Payment Terms: | T/T, L/C, D/A, D/P, Western Union, MoneyGram |
Supply Ability: | 50 set/ month |
Standard: | IEC60529 Clause 14.2.5 And Clause 14.2.6 | Nozzle Diameter: | Ф6.3mm, Ф12.5mm |
---|---|---|---|
Water Flow: | 12.5±0.625L/mi, 100±5 L/min | Pressure Gauge: | 0~0.25MPa |
Highlight: | waterproof tester,material testing equipment |
Electronic IEC Ingress Protection Test Equipment IPX5 IPX6 Hose Nozzle Test Device
Product information:
The HT IPX5/6 Handheld Jet Nozzle is designed and manufactured according to IEC60529 clause 14.2.5
and clause 14.2.6, used to verify protection against water into the second feature of 5/6 of the digital
electronic and electrical products. The IPX5 and IPX6 nozzles are easy to be switched during use.
The device needs to configure a support table (speed of 1RPM), a high power pump, two high precision
flowmeter, in order to ensure the stability and accuracy of the test of water flow.
Working principle:
Working principle: The test device simulates that when the test samples suffer water flow as
12.5 +0.625L/min or 100 + 5 L/min in a certain period of time, thus to verify the waterproof performance
of the sample’s enclosure.
The test time is calculated according to the sample surface area: 1min/m², but the short test time is not
less than 3min.
Technical parameters:
No. |
Item |
IPX5 |
IPX6 |
1 |
Water supply |
Water flow rate > 12.5L/min±5% clean water without inclusion. It can be achieved by the stainless steel water tank and pressurized equipment |
Water flow rate >100L/min±5% clean water without inclusion. It can be achieved by the stainless steel water tank and pressurized equipment |
2 |
The nozzle diameter |
Ф6.3mm |
Ф12.5mm |
3 |
Water flow |
12.5±0.625L/min,Flow meter is adjustable |
100±5 L/min,Flow meter is adjustable |
4 |
The distance from jet nozzle to enclosure |
2.5~3m |
2.5~3m |
5 |
Testing time |
Not less than 1min/m²(not less than 3 mins) |
Not less than 1min/m²(not less than 3mins) |
6 |
Pressure gauge |
0~0.25MPa |
0~0.25MPa |
7 |
Site requirements |
Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. Wall installation |
Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. Wall installation |
Contact Person: Ms. Tessa Huang
Tel: +86 18933919125
Fax: 86-020-31143909-805