We provide you with industry leading test equipment,
advanced online system and solutions–anywhere in the world.
|Place of Origin:||China|
|Certification:||calibration certificate (cost additional)A|
|Minimum Order Quantity:||1 set|
|Delivery Time:||30 days|
|Supply Ability:||10 set /month|
|Standard:||IEC60529||Control:||PLC Intelligent Control|
|Needle Hole:||Φ0.4mm||Water Flow:||1-10L/min Adjustable|
|Testing Time:||0.01S～99hours 59min，can Be Preset||Turntable Diameter:||600/800/1000mm|
material testing equipment
IEC60529 IPX3 / IPX4 PLC Control 0.4mm Needle Hole Oscillating Tube Open Type Tester
Oscillating tube tester is designed and manufactured in accordance with the standard requirement of IEC60529 IPX3 and IPX4,IEC60335-1 clause 15.1. It is used for the waterproof test of the electrical equipment.
The oscillating tube part of this device is controlled by adjustable-speed motor and crank-link mechanism. This device is reciprocating swing from the place of ±60°to another one of ±175°with the speed required by the standard through machine adjusting angle.
The angle adjustment is accurate. The structure is stable and durable. It is equipped with rotating stage through which the rotating of 90°can be achieved. It is also equipped with clean water filtration unit to prevent the pinhole from jamming.
Water flow rate＞10L/min±5% clean water without inclusion.
This device is equipped with clean water filtration unit
|2||The size of the oscillating tube||
Come with R200, R400, R600, R800, R1000, R1200, oscillating tube
(R1400,R1600mm can be optional), stainless steel
|4||Included angle of two holes||IPX3:120°; IPX4:180°|
|5||pendulum angle||IPX3:120°; IPX4:360°|
|7||Water flow||Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/minX per hole)|
|8||Testing time||0.01S～99 hours 59mins,can be preset|
Dedicated IP waterproof test room, The ground should be flat with illumination
10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation
|11||The area||According to the oscillating tube chose|
|2||Oscillating tube drive||Stainless steel cover,Worm gear reducer drive||2||There are one high and low pressure drive shaft and tailstock, high-axis for large swing tube, low shaft is for the small swing tube.|
|3||Support the tailstock||Industrial Molding Aluminum||1|
|4||Servo motor||750W,Matsushita Electric Works||1|
|5||Rotating water head||1/2″||1|
|6||Water spray needle seat||M5 cone seat,Stainless steel||240||Includes spare needle holder|
|7||Stainless steel needle mouth||φ0.4mm||240||Includes spare needle tip|
|8||Blocking head||Sealed ball||50||Spare parts|
|10||Ball valves||1/2″,Exclude stagnant water||1|
Contact Person: sales