Thanks for the delivery and of course for the equipment itself.
The shipment went well and the test-equipment is now here and ready to be used (see picture).
First impression is very good and installation as well as first test run were successful.
Even the swiss plug has been assembled at the power cord. :-)
—— Mr. Martin Kaempf
Thanks for your e-mail!
Yes, we received the Impact hammer 2 days ago! It seems to working well ;)
If there are any further requests, by our side, we will contact you again!
—— Dirk Fleischer
Shipment and delivery went without issue. Equipment is well-constructed and professional looking.
It performs as specified.
Thank you for all of your help, it was a pleasure working with you.
—— Brian Schroeder
Dear Lily,Thanks for your mail and follow-up!Yes, the products are fine, thanks!Have a nice weekend
IEC60068-2-75 Impact Testing Machine Nylon Base 1000*1000mm Thickness 8mm Introduction: This device conforms to the standard requirement of the IEC60068-2-75 Test Ehc. It is for testing enclosure mechanical ... Read More
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Impact Drills Tester Standard: IEC 60745-2-1: Particular requirements for drills and impact drills, clause 17; IEC 60745-2-6: Particular requirements for ... Read More
YDT757 Hammer Test Device, Impact Height 300mm, Hammer Blade Width 20mm The device shall be installed on a stable wooden test bench, and the test surface shall be kept at the same height as the hammer base. The ... Read More
IEC60068-2-75 Impact Testing Machine / Vertical Hammer Test Apparatus 0-1m Drop Height The hammer consists basically of a striking element which falls freely from rest through a vertical height, selected from ... Read More
IEC60068-2-75 Test Ehc Vertical Hammer Electromagnet Release Tester Of 2J 5J 10J 20J 50J Product Introduction This device conforms to the standard requirement of the IEC60068-2-75 Test Ehc. It is for testing ... Read More
Impact Testing Machine High Energy Pendulum Hammer Test Apparatus Stainless Steel Impact Elements Standard: IEC60068-2-75 Environmental testing –Part 2: Tests – Test Eh: Hammer tests clause 5 Test Eha: Pendulum ... Read More
IEC 60068-2-75 Test EHA Pendulum Hammer Test Apparatus With 10kg Mounting Support IEC60884-1 Clause 24.1 The specimens are checked by applying blows by means of the pendulum hammer test apparatus as described ... Read More
IEC60068-2-75 up to 50J Impact Testing Machine-Pendulum Hammer Test Apparatus With 1000mm Rigid Arm IEC60068-2-75 Clause 4.2: The test apparatus consists basically of a pendulum rotating at its upper end in ... Read More
IEC60068-2-75 Annex A Impact Testing Machine IK Level Test IK07 to IK10, and 50J The figures in this annex show the shape and characteristics of the striking elements applicable to each of the six energy ... Read More