Tel:
Guangzhou HongCe Equipment Co., Ltd.
Guangzhou HongCe Equipment Co., Ltd.

We provide you with industry leading test equipment,

advanced online system and solutions–anywhere in the world.

 

Home ProductsElectrical Appliance Tester

IEC60335-1 Clause 25.15 Electrical Appliance Tester

IEC60335-1 Clause 25.15 Electrical Appliance Tester

  • IEC60335-1 Clause 25.15 Electrical Appliance Tester
  • IEC60335-1 Clause 25.15 Electrical Appliance Tester
  • IEC60335-1 Clause 25.15 Electrical Appliance Tester
  • IEC60335-1 Clause 25.15 Electrical Appliance Tester
IEC60335-1 Clause 25.15 Electrical Appliance Tester
Product Details:
Place of Origin: China
Brand Name: HongCe
Certification: Calibration certificate
Model Number: PF-2
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiatable
Packaging Details: Plywood
Delivery Time: 25 work days
Payment Terms: T/T, Western Union
Supply Ability: 15 sets/month
Contact Now
Detailed Product Description
Standard: IEC60335-1 Clause 25.15 Work Station: 2
Bending Angle: 0~360° Adjustable Bending Rate: 10~60rpm
High Light:

Clause 25.15 Electrical Appliance Tester

,

IEC 60335-1 Electrical Appliance Tester

IEC60335-1 Clause 25.15 Power Cord Flexibility Tester With 2 Working Stations

 

 

 

Product information:

The test appliance conforms to IEC60335-1 Clause 25.15. It is used to test the power cord tension and torque at the terminal two trials of the appliances which are with a power cord, and intended flexible cord permanently connected to the fixed wiring and other household electrical appliances, medical equipment, checking whether the clamping device is secure.

The test times can be preset (up to 999999 times), the test automatically conducted, automatic calculate the test times, when the test reaches to the preset number of times, the device will automatic shut down and produce a signal of the ending test, the load on and off test can be done if connect with a load.

 

 

Technical parameters:

 

Power supply

AC220V, 50HZ

Test station

2 working station,with two sets of fixtures

Bending angle

0~360° adjustable

Bending rate

10~60rpm

The load weight

5N, 10N ,20N , 113G, 284G, 2pcs for each

Counter

2 independent counters for corresponding station, one total counter, counting times:0 to 999999

Action principle

Adopt motor servo drive system, the swing angle and speed regulation of high precision

Control

Using visual touch-screen display and PLC control, direct viewing operate in control and parameter settings

Disconnection instructions

Indicator with audible alarm

Dimensions

L870mmXW610mmXH820

 

 

Preparation:

Sample Installation: Mount the non-rewirable plug (test sample) on the fixture and fasten it. Install requirement is to make the lateral displacement of the cord and load to be minimum when the flexing mechanism in flexing. The axial line of the cords should be perpendicular and passed through to the flexing axial line.

Access 220V / 50HZ power, turn on the power switch, at this time power indicator light flashes, indicate the power has accessed, to check whether the emergency stop switch has popped up, after the sample load supplied, the power cord connected, and the plug of the power cord is inserted into the load socket, adjust the voltage and current values to meet the test conditions, put up all the required weights.

 

Record results:

When the device is running to the number of bending times preset, the motor will automatically shut down, the indicator light will illuminate and with sound alarm when testing has been completed. The indicator light on the station remains in a state of bending test, that is the station without broken plug’s indicator light illuminate, the record value of the counter is the same with the record value preset, while the indicator light die out on the broken station, the record value of the counter must be smaller than the record value preset. Therefore, before you press the stop button, be sure to make a record of the test results

IEC60335-1 Clause 25.15 Electrical Appliance Tester 0IEC60335-1 Clause 25.15 Electrical Appliance Tester 1

Contact Details
Guangzhou HongCe Equipment Co., Ltd.

Contact Person: sales

Tel: +8618826455520

Send your inquiry directly to us
Guangzhou HongCe Equipment Co., Ltd.
BLDG D2, Jinhe Industrial Park, Dashi Street, Panyu, Guangzhou, Guangdong
Tel:86--17724266108
Mobile Site Privacy Policy China Good Quality IEC Test Equipment Supplier. © 2014 - 2021 iectestingequipment.com. All Rights Reserved.