 |
| Place of Origin: | China |
| Brand Name: | HongCe |
| Certification: | calibration certificate (cost additional) |
| Model Number: | HH0802 |
| Minimum Order Quantity: | 1 set |
|---|---|
| Price: | Negotiatable |
| Packaging Details: | Plywood |
| Delivery Time: | 45 days |
| Payment Terms: | T/T |
| Supply Ability: | 10 set /month |
| Standard: | IEC60529, IEC 60335-1 And Etc | Warranty: | 1 Year |
|---|---|---|---|
| Control: | PLC Intelligent Control | Needle Hole: | Φ0.4mm |
| Turntable Diameter: | 600mm | Included Angle Of Two Holes: | IPX3: 120°; IPX4: 180° |
| Tube Radius: | 200~1600mm | Water Flow: | 1-10L/min Adjustable |
| High Light: | PLC IP Testing Equipment,IPX3 IP Testing Equipment |
||
IP Testing Equipment Open-Type Spraying And Splashing Test for IPX3/ IPX4
Application of IP Testing Equipment:
IPX3/IPX4 Water Spraying & Splashing Test Equipment is used to determine the protection of the enclosure against spraying water and splashing water.
In addition to the chamber-type rain test device, Hongce also supplies IPX3/4 open-type spraying and splashing test equipment.
Feature of IP Testing Equipment:
The oscillating tube made of stainless steel is a semi-circular hollow pipe distributed with holes at the specified density and size to point to the center of the circle. Swivel tubes of different radii are available to cater to various samples. The tubes for IPX3 testing can spray water over the sample at an angle up to 60° on either side of the vertical, and the tubes for IPX4 testing can splash water over the sample from any direction. All spraying actions of the machine are performed automatically under control. The maximum test distance required by the 2 test items is 200 mm.
Parameter of IP Testing Equipment:
| Item | parameters |
| Water supply |
Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
| The size of the oscillating tube |
Standard coming with 3 pcs oscillating tubes (size R200, R400, R600, R800 R1000,R1200,R1400,R1600mm can be optional), stainless steel |
| Water hole | Φ0.4mm |
| Included angle of two holes | IPX3: 120°; IPX4: 180° |
| pendulum angle | IPX3: 120°; IPX4: 360° |
| Raining speed |
IPX3: 4s/time(2×120°); IPX4: 12s/time(2×360°); |
| Water flow | Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/min X per hole) |
| Testing time | 0.01S～99 hours 59mins,can be preset |
| Site requirements | Dedicated IP waterproof test room, The ground should be flat with illumination.10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation |
| The area | According to the oscillating tube chose |
Contact Person: Tessa Huang
Tel: +8618933919125
Fax: 86-020-31143909-805
