Tel:
Guangzhou HongCe Equipment Co., Ltd.
Guangzhou HongCe Equipment Co., Ltd.

We provide you with industry leading test equipment,

advanced online system and solutions–anywhere in the world.

 

Home ProductsIngress Protection Test Equipment

Tiltable Rotating 600mm Stage Ingress Protection Test Equipment With Independent Control Box 150KG Adjustable Height

Tiltable Rotating 600mm Stage Ingress Protection Test Equipment With Independent Control Box 150KG Adjustable Height

  • Tiltable Rotating 600mm Stage Ingress Protection Test Equipment With Independent Control Box 150KG Adjustable Height
  • Tiltable Rotating 600mm Stage Ingress Protection Test Equipment With Independent Control Box 150KG Adjustable Height
  • Tiltable Rotating 600mm Stage Ingress Protection Test Equipment With Independent Control Box 150KG Adjustable Height
  • Tiltable Rotating 600mm Stage Ingress Protection Test Equipment With Independent Control Box 150KG Adjustable Height
Tiltable Rotating 600mm Stage Ingress Protection Test Equipment With Independent Control Box 150KG Adjustable Height
Product Details:
Place of Origin: China
Brand Name: HongCe
Certification: Calibrate Certificate (Cost Additional )
Model Number: HH0815
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiatable
Packaging Details: plywood
Delivery Time: 30 days
Payment Terms: T/T
Supply Ability: 10 set /month
Contact Now
Detailed Product Description
Turntable Diameter: Ø600mm Customized Sample Holder: Ø600mm Customized
Turntable Speed: 1r/min-10r/min, Adjustable Tiltable Angle: 15°
Test Angle Of Rotation: Continuous Rotation Load Bearing: 150kg
High Light:

waterproof tester

,

material testing equipment

IEC60529 Tiltable Rotating 600mm Stage With Independent Control Box 150KG Adjustable Height

 

Product Introduction

The rotating table is manufactured in accordance with the standard of Clause IEC60529 testing purpose.The loading platform can be inclined 15°to meet with IPX2 inclined testing requirement.

Nomal Test

1. Turntable installation

Loosen the screw on the upper part of the supporting column, rotate the upper support stage, can adjust the height of turntable.

The bottom is provided with four supporting feet, and the supporting feet is adjusted to make the turntable perpendicular to the ground. Two screws were installed opposite at the bottom, loosen the two screws, can tilt the turntable. Tightening the screws according to the screw hole position after tilt, the support stage with an angle of 15 degrees to vertical turntable.

2.Start test

Place the sample to be tested on the turntable, adjust the tilting screw at the bottom of the turntable as needed, and tilt the turntable 15°. Press the start button and adjust the speed regulator according to the desired speed. If the sample is too heavy, the upper support stage can be removed and placed directly on the underside aluminum plate.

 

Technical Parameters

Turntable diameter Ø600mm
Sample holder Ø600mm
Turntable speed 1r/min-10r/min, adjustable
Tiltable angle 15°
Test angle of rotation continuous rotation
Adjustable height of the adjustable telescopic tube 1200mm-1800mm
Load bearing ≤150kg(Underside aluminum plate)
 

Control Function Overview

POWER Used for turning on /off the power supply, when the power supply is turned on, the stop indicator is bright.
START Press this button, the turntable starts to rotate, and the green indicator lights up.
STOP Press this button, the turntable stop to rotate.
SPEED REGULATION Press the start button and adjust the speed control knob to achieve the required test speed

 

Common Faults And Treatment

1. The power-on indicator does not light, check if the fuse and indicator are burnt out and replace it

2. The turntable cannot be turned, check if the speed control light is on.

 

Note: This equipment is powered by high voltage and must be protected against electric shock during use. The operator must strictly abide by the operating procedures and the outer casing of the equipment and the metal casing touched by personnel must be well grounded.

 

Tiltable Rotating 600mm Stage Ingress Protection Test Equipment With Independent Control Box 150KG Adjustable Height 0

Tiltable Rotating 600mm Stage Ingress Protection Test Equipment With Independent Control Box 150KG Adjustable Height 1

Tiltable Rotating 600mm Stage Ingress Protection Test Equipment With Independent Control Box 150KG Adjustable Height 2

 

 

 

Contact Details
Guangzhou HongCe Equipment Co., Ltd.

Contact Person: sales

Tel: +8618826455520

Send your inquiry directly to us
Guangzhou HongCe Equipment Co., Ltd.
BLDG D2, Jinhe Industrial Park, Dashi Street, Panyu, Guangzhou, Guangdong
Tel:86--17724266108
Mobile Site Privacy Policy China Good Quality IEC Test Equipment Supplier. © 2014 - 2021 iectestingequipment.com. All Rights Reserved.