 |
| Place of Origin: | China |
| Brand Name: | HongCe |
| Certification: | calibration certificate (cost additional) |
| Model Number: | HH0802 |
| Minimum Order Quantity: | 1 set |
|---|---|
| Price: | Negotiatable |
| Packaging Details: | Plywood |
| Delivery Time: | 45 days |
| Payment Terms: | T/T |
| Supply Ability: | 10 set /month |
| Standard: | IEC60529, IEC 60335-1 And Etc | Warranty: | 1 Year |
|---|---|---|---|
| Control: | PLC Intelligent Control | Needle Hole: | Φ0.4mm |
| Turntable Diameter: | 600mm | Included Angle Of Two Holes: | IPX3: 120°; IPX4: 180° |
| Tube Radius: | 200~1600mm | Water Flow: | 1-10L/min Adjustable |
| High Light: | IPX4 Oscillating Tube Tester,IPX3 Oscillating Tube Tester,PLC Oscillating Tube Tester |
||
IPX3 IPX4 Oscillating Tube Tester To Verify Protection Against Spraying And Splashing Water
Standard:IEC60529 degree of protection provided by enclosures (IP Code) of the IPX3 and IPX4, IEC 60884-1, IEC 60335-1, IEC 60598-1.
Application:It is used for the testing of IPX3 and IPX4. Ingress Protection Test Equipment
Test sample:The test apparatus with water proof functions, such as electronic appliances, lamps, electrical cabinets, electrical components, car, motorcycle, electrical products (such as automotive instrument, all kinds of switches, micro motors, etc.)
Feature:There are two models: Open type and chamber type. Using PLC control, motor drive oscillating tube to do the reciprocating motion at a certain angle, at the same time control the water flow, the turntable rotates at a certain speed, so that to make every side of the sample testing uniformly. Ingress Protection Test Equipment
Parameters:
| Item | Parameters |
| Input power | Single-phase AC220V,50Hz |
| Water supply |
Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
| Control and operation | PLC intelligent control, 7 inch color touch screen operation |
| The size of the oscillating tube | R200 ,R400,R600,R800,R1000,R1200,R1400,R1600mm. Optional,stainless steel |
| Needle hole | Φ0.4mm |
| Included angle of two holes | IPX3:120°； IPX4:180° |
| Pendulum angle | IPX3:120°(±60°)； IPX4:350°(±175°) |
| Raining speed |
IPX3:4 s/time(2×120°)； IPX4:12 s/time(2×350°)； Ingress Protection Test Equipment |
| Water flow | 1-10L/min adjustable |
| Testing time | 0.01S～99hours 59min,can be preset |
| Rotary plate | Diameter:Φ600mm；Rotate speed:1r/min,Can be paused at four aspects, Load bearing≤50㎏electrical equipment |
| Pressure gauge | 0~0.25MPa |
| Site requirements |
Dedicated IP waterproof test room,The ground should be flat with illumination 10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation |
| Area covered | It is set according to the selected oscillating tube |
Picture for reference:
Contact Person: Tessa Huang
Tel: +8618933919125
Fax: 86-020-31143909-805
