Send Message
Home ProductsImpact Testing Machine

Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment

Certification
China Guangzhou HongCe Equipment Co., Ltd. certification
China Guangzhou HongCe Equipment Co., Ltd. certification
Customer Reviews
Thanks for the delivery and of course for the equipment itself. The shipment went well and the test-equipment is now here and ready to be used (see picture). First impression is very good and installation as well as first test run were successful. Even the swiss plug has been assembled at the power cord. :-)

—— Mr. Martin Kaempf

Dear Anglia, Thanks for your e-mail! Yes, we received the Impact hammer 2 days ago! It seems to working well ;) If there are any further requests, by our side, we will contact you again!

—— Dirk Fleischer

Shipment and delivery went without issue. Equipment is well-constructed and professional looking. It performs as specified. Thank you for all of your help, it was a pleasure working with you.

—— Brian Schroeder

Dear Lily,Thanks for your mail and follow-up!Yes, the products are fine, thanks!Have a nice weekend

—— Michael Larsen

I'm Online Chat Now

Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment

Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment
Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment

Large Image :  Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment

Product Details:

Place of Origin: China
Brand Name: HongCe
Certification: TUV、ITS、CSA、BV、SGS 、CNAS(cost additional)
Model Number: VH-2

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: Negotiatable
Packaging Details: Plywood
Delivery Time: 25 days
Payment Terms: T/T, L/C, D/A, D/P, Western Union, MoneyGram
Supply Ability: 15 set per month
Detailed Product Description
Test: Vertical Drop Test Drop Hammer: 2J, 5J, 10J, 20J (option 50J)
Material: Stainless Steel Power Supply: 220VAC 50Hz
Lift Stroke: 400-1350mm Release Mode: Electromagnet Instantaneous Release
High Light:

impact test machine

,

pendulum impact testing machine

Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment

 

 

Technical parameters:

  1. Power supply: 220V / 50Hz.
  2. Lift stroke: 400-13500mm, manual operation, the impact specimen height is 200-850mm.
  3. Hammer: 2, 5, 10, 20 and 50J, stainless steel, matching 5 conduits.
  4. Release mode: Key control, electromagnet instantaneous release.
  5. Size and weight:2000*1000*1620mm, about150kg.
Power supply 220V / 50Hz
Lift stroke 400-13500mm, manual operation, the impact specimen height is 200-850mm
Hammer 2J, 5J, 10J, 20J, (option 50J)stainless steel, matching 4 conduits.
Installation mode The hammers are by electromagnet, the conduits are by screw-in.
Release mode Key control, electromagnet instantaneous release.
Dimensions 1000*1000*1620mm, about150kg

 

Height of fall

To produce impacts of the required severity, the striking element shall be released from a height depending on the equivalent mass of the pendulum, according to table 2.

 

Table 2-Height of fall

Energy J

0.14

0.2

0.3

0.35

0.4

0.5

0.7

1

2

5

10

20

50

Equivalent mass kg

0.25

0.2

0.25

0.2

0.25

0.2

0.2

0.25

0.25

0.25

0.5

1.7

5

5

10

Height of fall mm ±1%

56

100

80

150

140

200

250

200

280

400

400

300

200

400

500

NOTES

1. See note in 3.2.2.

2. In this part of IEC 60068, the energy, J, is calculated taking the standard acceleration due to the earth’s gravity (gn), rounded up to the nearest whole number, that is 10 m/s²

 

Product information:

This device conforms to the standard requirement of the IEC60068-2-75 Test Ehc. It is for testing enclosure mechanical strength of household and similar electrical appliances, lamps. The device is released by the electromagnet, which can ensure the instantaneous release and the vertical drop. The lifting device is combined by screw guide rail, which can make the lower end of the conduit smooth contact with the surface of the specimen, the fixed drop height is the length of the guide rail, just contact no need to adjust, easy to use. Standard equipped with 2, 5, 10, 20, 50 J hammer and conduit, it is suitable for the enclosure mechanical strength test of most products.

 

Operation steps:

  1. Turn on the power 220V 50Hz.
  2. The specimen is placed on the nylon base plate.
  3. Choose the impact hammer and conduit according to the specimen.
  4. Make [Drop Release] button pop-up. At this time the button light off, install the hammer and conduit, the hammer will be absorbed by the electromagnet once it is put in, conduit screwing in the bottom bolt of the scale pan.
  5. Manual adjust the position of the lifting device and cross bar electromagnet, to make the lower end of the conduit just contact with the surface of the specimen and fixed the lifting device and cross bar lock bolt.
  6. Press [Drop Release] button. At this time the button light on, the hammer finishes one impact through a vertical conduit drop impact the specimen. Pop-up [Drop Release] button, and ready for the next impact test. 

Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment 0

 

Contact Details
Guangzhou HongCe Equipment Co., Ltd.

Contact Person: Tessa Huang

Tel: +8618933919125

Fax: 86-020-31143909-805

Send your inquiry directly to us (0 / 3000)