 |
| Place of Origin: | China |
| Brand Name: | HongCe |
| Certification: | calibration certificate (cost additional) |
| Model Number: | HJ0608A |
| Minimum Order Quantity: | 1 set |
|---|---|
| Price: | Negotiatable |
| Packaging Details: | plywood |
| Delivery Time: | 30 days |
| Payment Terms: | T/T |
| Supply Ability: | 10 set /month |
| Model: | HJ0608A | Flexing Angle: | 0-360° |
|---|---|---|---|
| Control: | PLC Control | Language: | English |
| Configuration: | 0~4KW | Bearing: | Max. 10kg |
| High Light: | 4KW Flexing Test Apparatus,IEC 60335 Flexing Test Apparatus,PLC Flexing Test Apparatus |
||
4KW Household Appliance Supply Cord IEC60335 PLC Control Flexing Test Apparatus
Standard: Clause 23.3 and 25.14 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements, IEC60335-2-14 and etc.
Application: It is used to check that the supply cord of the small household appliances (such as Coffee pot / electric iron) and lamps is adequately protected against excessive flexing where it enters the appliance.
Test sample: Small household appliances, such as coffee pot, electric iron, toaster, luminaires and etc.
Feature: The test stations, test angles, load voltage can be customized. The test cycles, speed, voltage and etc. can be preset.
Technical Parameters:
| Item Name | Parameters |
| Flexing angle | 0-360°. Can be preset |
| Flexing speed | 0~60 rpm, can be preset |
| Test times | 0~999999 times, can be preset and displayed |
| Power | 120V 60Hz |
| Control | PLC programmable control |
| Drive | Servo motor |
| Operation | Touch screen intelligent operation |
| Configuration | 0~4KW transformer, test current can be displayed |
| Bearing | Max. 30kg |
| Test station | 1 station |
| Specimen fixture | Universal fixtures, with center gage of rotation |
| Load weights | 5N*1,10N*1 |
| Standards | IEC 60335-1, IEC 60335-2-14, GB4706.1, GB2099 |
Maintenance
Common Faults And Treatments
| No. | Fault | Reason | Treatment |
|
1 |
Turn on the POWER switch, but the indicator light not turn on | The external power supply is not connected | Please connect to the external power supply |
| The fuse is broken | Find out the reason and change the fuse. | ||
| The indicator light damaged | Replace the light | ||
|
2 |
Turn on the POWER switch, Touchscreen not work | The internal DC24V power supply is in problem | Replace the DC24V power supply |
| Touchscreen damaged | Replace the touchscreen | ||
| 3 | Touchscreen no response | Connection to PLC loose | Reconnect |
| Touchscreen damaged | Replace the touchscreen | ||
| 4 | Load power no power supply | Load socket damaged | Replace the socket |
| The fuse is broken | Change the fuse | ||
|
5 |
Press down Start button, but the manipulators do not work. |
The display value and preset value of test times are the same | Press Count Cleared |
| The E-STOP button is not reset | Release E-STOP button | ||
| There is foreign object in the machine, the machinery is stuck | Remove the foreign object | ||
| It is not under auto test mode | Press Start button | ||
| Connection to motor loosen | Reconnect | ||
| Not in starting position | Homing | ||
| 6 | Noise | Swivel speed low or too high | Reset the speed |
| Connection to motor loosen | Reconnect |
Contact Person: Tessa Huang
Tel: +8618933919125
Fax: 86-020-31143909-805
