Send Message
Home ProductsIEC Test Equipment

220v IEC Test Equipment Tumbling Barrel Testing Machine With 19mm Thick Blockboard

Certification
China Guangzhou HongCe Equipment Co., Ltd. certification
China Guangzhou HongCe Equipment Co., Ltd. certification
Customer Reviews
Thanks for the delivery and of course for the equipment itself. The shipment went well and the test-equipment is now here and ready to be used (see picture). First impression is very good and installation as well as first test run were successful. Even the swiss plug has been assembled at the power cord. :-)

—— Mr. Martin Kaempf

Dear Anglia, Thanks for your e-mail! Yes, we received the Impact hammer 2 days ago! It seems to working well ;) If there are any further requests, by our side, we will contact you again!

—— Dirk Fleischer

Shipment and delivery went without issue. Equipment is well-constructed and professional looking. It performs as specified. Thank you for all of your help, it was a pleasure working with you.

—— Brian Schroeder

Dear Lily,Thanks for your mail and follow-up!Yes, the products are fine, thanks!Have a nice weekend

—— Michael Larsen

I'm Online Chat Now

220v IEC Test Equipment Tumbling Barrel Testing Machine With 19mm Thick Blockboard

220v IEC Test Equipment Tumbling Barrel Testing Machine With 19mm Thick Blockboard
220v IEC Test Equipment Tumbling Barrel Testing Machine With 19mm Thick Blockboard 220v IEC Test Equipment Tumbling Barrel Testing Machine With 19mm Thick Blockboard 220v IEC Test Equipment Tumbling Barrel Testing Machine With 19mm Thick Blockboard 220v IEC Test Equipment Tumbling Barrel Testing Machine With 19mm Thick Blockboard

Large Image :  220v IEC Test Equipment Tumbling Barrel Testing Machine With 19mm Thick Blockboard

Product Details:

Place of Origin: China
Brand Name: HongCe
Certification: TUV、ITS、CSA、BV、SGS 、CNAS(cost additional)
Model Number: TB-3

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: Negotiatable
Packaging Details: Plywood
Delivery Time: 30 days
Payment Terms: T/T, L/C, Western Union
Supply Ability: 10 sets per month
Detailed Product Description
Rotating Speed: 5 R/min Sample Drop: 10 Times / Minute
Drop Height: 500 Mm Barrel Number: Single Barrel
Power Supply: 220V AC50Hz Meet The Standard: BS1363.1
High Light:

iec testing equipment

,

laboratory test equipment

220v IEC Test Equipment Tumbling Barrel Testing Machine With 19mm Thick Blockboard

 

 

Product information:

 

This tester is according to the standard of BS1363.1 clause 20, figure 20 to manufacture, which is used to do the drop test of the electrical accessories, in order to determine the dropping suitability of the product during transportation or the minimum firm level of security required for the determination of safety requirements.

 

Plugs shall have adequate mechanical strength and be so constructed as to withstand such handling as may be expected in normal use.

Compliance shall be checked by tests given in 20.1.2 and 20.1.3.

A solid link of stainless steel as shown in Figure 19 is inserted and withdrawn from the fuse clips of the plug 20 times in succession in a normal manner. Not in mis-use conditions, at a rate not exceeding 10 per minute. A standard fuse link complying with BS 1362:1973 is then fitted and the appropriate mechanical strength test completed.

Rewirable plugs are fitted with 3-core PVC 1.25 mm² flexible cord as given in Table 27 of BS 6500:2000, the terminals and cover screws being tightened with the torque given in Table 3.

Non-rewirable plugs are tested as delivered.

Rewirable plugs with clamp type (screwless) terminals are fitted with 3-core PVC 1.25 mm²flexible cord as given in Table 27 of BS 6500:2000. The connection of the conductors shall be made in accordance with the manufacturer’s instructions.

The flexible cords attached to plugs are cut to a length of 150 mm ±5 mm measured from the nearest edge of the earthing pin, precoiled flexible cords being extended before measurement.

Plugs are tested in the tumbling barrel shown in Figure 20. The barrel is turned at a rate of approximately 5 r/min, (approximately 10 falls per minute).

This tester is according to the standard of BS1363.1 clause 20, figure 20 to manufacture, which is used to do the drop test of the electrical accessories, in order to determine the dropping suitability of the product during transportation or the minimum firm level of security required for the determination of safety requirements.

 

Technical parameters:

Model TB-3
Rotating speed 5 r/min
Sample drop 10 times / minute
Barrel material Front and rear are the transparent plastic sheet, the up, down, left and right are with thickness of 10~19mm plywood
Test times 0-9999 times,can be preset
Drop height 500mm
Barrel number Single barrel
Power supply 220V AC50Hz
Meet the standard BS1363.1

220v IEC Test Equipment Tumbling Barrel Testing Machine With 19mm Thick Blockboard 0

Contact Details
Guangzhou HongCe Equipment Co., Ltd.

Contact Person: Tessa Huang

Tel: +8618933919125

Fax: 86-020-31143909-805

Send your inquiry directly to us (0 / 3000)