Tel:
Guangzhou HongCe Equipment Co., Ltd.
Guangzhou HongCe Equipment Co., Ltd.

We provide you with industry leading test equipment,

advanced online system and solutions–anywhere in the world.

 

Home ProductsIEC Test Equipment

PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester

PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester

  • PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester
  • PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester
  • PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester
  • PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester
PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester
Product Details:
Place of Origin: China
Brand Name: HongCe
Certification: Third part calibration certificate(cost additional)
Model Number: HJ0605
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiatable
Packaging Details: plywood
Delivery Time: 25 days
Payment Terms: T/T
Supply Ability: 10 set /month
Contact Now
Detailed Product Description
Standard: IEC60335-1 Clause 22.16 And Etc. Test Speed: 30 Cycles / Min
Withdrawable Angle: 30~70°, Can Be Preset Withdrawable Stroke: Maximum 1000mm, Can Be Adjusted
Drive Mode: Pneumatic Control: PLC Control System
High Light:

iec tester

,

laboratory test equipment

 

IEC60335 Testing Equipment Of Plc Control System 1000mm Adjustable Automatic Cord Reels Endurance Tester

 

 

Standard: Clause 22.16 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements.

 

Application: It is used to check the automatic cord reels shall be constructed so that they do not cause

– undue abrasion or damage to the sheath of the flexible cord;

– breakage of conductor strands;

– undue wear of contacts.

 

Test sample: Automatic cord reels of household appliances and similar electrical appliances.

 

Feature: The device adopts a multi-functional fixture, large work surface, can test cord reels up to 300cm, test speed (5-30 times / min) is adjustable, and it is suitable for most test electrical products.

 

Parameters:

Input Power 220V/50HZ
Gas Source Compressed air 5 ~ 7kg / cm²
Test Speed 30 cycles / min (or at the maximum rate allowed by the construction of the cord reel if this is less)
Test Cycles 0~9999 times, the test device will stop working automatically when the preset test cycles are finished
Drive Mode Pneumatic
Withdrawable Angle 30~70°, can be preset
Fixture Quick clamping fixtures, easy for clamping the test sample
Withdrawable Stroke Maximum 1000mm, can be adjusted

 

Installation And Commissioning:

1. Turn on the power, preset test times and the interval time, the backward time is default (no need to preset). Regarding the setting method, please refer to the instrument parameter setting method.

 

2. Access to the gas source, open the intake switch, required pressure: > 0.6mpa.

Note: The reel speed will be reduced at a low pressure.

 

PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester 0PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester 1

1. Adjust the position of the upper limit switch according to the required pull-out length of the cord. Start the device, and determine the pull-out length of the cord.

 

 

4. Shake the adjustment hand wheel to adjust the angle of the pull-out cord.

 

5. Start the device, and adjust the test speed to the desired test speed.

 

Adjust the test speed Adjust the air pressure Adjust the interval time

 

6. Install the test sample on the proper position:

   Fix the plug of the cord, then adjust the hand wheel to make the axis of the reel in the vertical position on the lift rod .

   If the sample reel has the control switch , should make the control switch in the open state.

 

Figure: vacuum cleaner installation schematic

 

PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester 2

PLC Control System IEC Test Equipment , 1000mm Adjustable Automatic Cord Reels Endurance Tester 3

 

About Us:

 

Guangzhou Hongce Equipment Co., Ltd is a leading company in inspection equipment industry, established in 2003 and located in Guangdong, China. Our company introduced advanced equipment, combined with the most advanced technology production processes, strict quality control system to control the entire process of production. The company combined with a number of high-tech management personnel and advanced equipment, and together with the modern management, computer design and control, our products has reached the international advanced level. The company set R&D design, production, sales as one, specializing in producing electric wire inspection equipment of plug and socket, mechanical robustness testing equipment of electronics, inspection equipment of electronics’ on-fire danger, testing indicator of anti-electric shock and solid objects' entry, general inspection equipment, and other non-standard testing equipment. Our products enhance good selling at home and abroad, and have established supply relationships with a number of well-known companies.

 

Contact Details
Guangzhou HongCe Equipment Co., Ltd.

Contact Person: Victoria Yuan

Tel: +8613724045048

Send your inquiry directly to us
Guangzhou HongCe Equipment Co., Ltd.
BLDG D2, Jinhe Industrial Park, Dashi Street, Panyu, Guangzhou, Guangdong
Tel:86--17724266108
Mobile Site Privacy Policy China Good Quality IEC Test Equipment Supplier. © 2014 - 2021 iectestingequipment.com. All Rights Reserved.