We provide you with industry leading test equipment,
advanced online system and solutions–anywhere in the world.
|Place of Origin:||China|
|Certification:||Calibration certificate(cost additional)|
|Minimum Order Quantity:||1 set|
|Delivery Time:||20 days|
|Payment Terms:||L/C, T/T|
|Supply Ability:||30 set per month|
|COLOR:||White||MATERIAL:||Stainless Steel + Nylon|
|FORCE:||10N, 20N, 30N||STANDARD:||IEC 61032 Figure 2/ IEC 60529|
laboratory test equipment
IEC 60884-1 2013 clause 23.2, VDE0620 clause 23.2
This probe also has provision to apply the force 0~ 75N with minimum resolution of 5N provided with banana pin at back side to check the continuity during the test.
The standard test finger is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. It is a special instrument for household and similar electrical appliances shell against electric shock test, an essential lab ware for the quality inspection departments and research units to detect relevant household appliances product safety performance.
|Name||Standard test finger with force|
|7||37o 0 -10’|
|8||14 o 0 -10’|
|9||Ф12 0 -0.05|
1. The standard test finger joint part cannot be touched with the live parts, or cannot be close to the dangerous parts, and the 50mm-20mm baffle cannot enter.
2. The test of preventing from dangerous parts requires the test probe B with 10N±3N thrust. Generally it needs to work with a force gauge.
3. The anti-electric shock requires working with anti-shock probe experiment device: connected to the anti-shock probe experiment device (40V-50V), processing the test according to the relative standard, the buzzer ring is electric shock prompted. View the pictures below:
Contact Person: sales