We provide you with industry leading test equipment,
advanced online system and solutions–anywhere in the world.
|Place of Origin:||China|
|Certification:||Calibration Certificate(cost additional)|
|Minimum Order Quantity:||1 set|
|Delivery Time:||25 days|
|Supply Ability:||15 set per month|
|Steel Rod:||Φ4.8mm||Load Weight:||100N|
|Standard:||IEC 60884-1 Figure 14||Clause:||14.2|
electric socket tester,
electrical plug tester
100 N Plug Socket Tester Device For Testing Non - Solid Pins
The appliance is checked by the test of clause 24 and, for pins which are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a steel rod having a diameter of 4,8 mm, the axis of which is also perpendicular to the axis of the pin. During the application of the force, the reduction of the dimension of the pin at the point where the force is applied shall not exceed 0,15 mm. After removal of the rod, the dimensions of the pin shall not have changed by more than 0,06 mm in any direction.
Standard: IEC 60884-1 2013 clause 14.2 figure 14
Application: This device is use to test the mechanical strength of Pins of portable accessories.
Test sample: Non-solid pins
Feature: Apply a 100N force as per standard requirements with standard requirements.
3,The stress pushed on bolt is from the rotating handwheel operated by manual.
|Test standard||IEC 60884-1 2013 clause 14.2 figure 14|
Manual rotating the wheel so that the pin bearing pressure, time for 1min.
IEC608841 Standard Scope:
This standard also applies to plugs which are a part of cord sets, to plugs and portable socket-outlets which are a part of cord extension sets and to plugs and socket-outlets which are a component of an appliance, unless otherwise stated in the standard for the relevant appliance.
Replace the penultimate paragraph and Note 4 by the following new paragraph and Note 4 and add new Note 5 as follows:
Plugs and socket-outlets complying with this standard should be suitable for use at ambient temperatures not normally exceeding +40 ℃, but their average over a period of 24 h does not exceed +35℃, with a lower limit of the ambient air temperature of -5℃.
Our advantage service:
We have our own developing and designing team, which ensure our own technological and innovative products for customers.
For any customers who have new idea about some products, just let us know, we can according to your idea provide a unique design of the products.
All our workers are experienced and skilled.
After sale service:
Our working team and sales teams can guarantee a fast and high efficiency after-sale service for our product sold to everywhere of the global.
Guangzhou Hongce Equipment Co., Ltd is a leading company in inspection equipment industry, established in 2003 and located in Guangdong, China. Our company introduced advanced equipment, combined with the most advanced technology production processes, strict quality control system to control the entire process of production. The company combined with a number of high-tech management personnel and advanced equipment, and together with the modern management, computer design and control, our products has reached the international advanced level. The company set R&D design, production, sales as one, specializing in producing electric wire inspection equipment of plug and socket, mechanical robustness testing equipment of electronics, inspection equipment of electronics’ on-fire danger, testing indicator of anti-electric shock and solid objects' entry, general inspection equipment, and other non-standard testing equipment. Our products enhance good selling at home and abroad, and have established supply relationships with a number of well-known companies.
Contact Person: sales