Tel:
Guangzhou HongCe Equipment Co., Ltd.
Guangzhou HongCe Equipment Co., Ltd.

We provide you with industry leading test equipment,

advanced online system and solutions–anywhere in the world.

 

Home ProductsElectrical Appliance Tester

IEC60335-1:25.15 Electrical Appliance Tester Power Cord Strain and Twist Tester

IEC60335-1:25.15 Electrical Appliance Tester Power Cord Strain and Twist Tester

  • IEC60335-1:25.15 Electrical Appliance Tester Power Cord Strain and Twist Tester
  • IEC60335-1:25.15 Electrical Appliance Tester Power Cord Strain and Twist Tester
  • IEC60335-1:25.15 Electrical Appliance Tester Power Cord Strain and Twist Tester
  • IEC60335-1:25.15 Electrical Appliance Tester Power Cord Strain and Twist Tester
IEC60335-1:25.15 Electrical Appliance Tester Power Cord Strain and Twist Tester
Product Details:
Place of Origin: China
Brand Name: HongCe
Certification: calibration certificate (cost additional)
Model Number: HJ0609
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiatable
Packaging Details: Plywood
Delivery Time: 25 days
Payment Terms: T/T
Supply Ability: 15 set per month
Contact Now
Detailed Product Description
Standard: IEC60335-1 Pull Weight: 20N*2, 30N*2
Torque Weight: 5N*1, 12.5N*1, 17.5N*1 Torque: 0.1Nm,0.25Nm,0.35Nm
Tension Frequency: 1 Times/s Torque Time: 0.01S~99 Hours 99 Mins
High Light:

portable appliance testing equipment

,

portable appliance tester

Cord Anchorage Strain And Twisting Test Equipment HJ0609

 

 

Product information:

The test appliance conforms to IEC60335-1:25.15. It is used to test the power cord tension and torque at the terminal two trials of the appliances which are with a power cord, and intended flexible cord permanently connected to the fixed wiring and other household electrical appliances, medical equipment, checking whether the clamping device is secure.

Appliances provided with a supply cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall have a cord anchorage. The cord anchorage shall relieve conductors from strain, including twisting, at the terminals and protect the insulation of the conductors from abrasion.

A mark is made on the cord while it is subjected to the pull force shown in follow table, at a distance of approximately 20 mm from the cord anchorage or other suitable point.

The cord is then pulled, without jerking, for 1 s in the most unfavourable direction with the force specified. The test is carried out 25 times.

The cord, unless on an automatic cord reel, is then subjected to a torque that is applied as close as possible to the appliance. The torque is specified in following table and is applied for 1 min.

During the tests, the cord shall not be damaged and shall show no appreciable strain at the terminals. The pull force is reapplied and the cord shall not be longitudinally displaced by more than 2 mm.

 

Technical parameters:

Power Supply AC230V, 50HZ
Pull force weights 20N*2, 30N*2( the pulling force of 30N, 60N, 80N, 100N can be achieved)
Torque weights 5N*1, 12.5N*1, 17.5N*1(the torque force 0.1Nm, 0.25Nm, 0.35Nm can be achieved)
Test times 0~9999(selectable),25 times is by default
Pull force frequency 1 times/s
Torque arm 20mm
Torque time 0.01S-99 hours 99 min
Clamp Combined clamp for both pull force and torque, matching by the bearing, can reduce the friction when processing torque test
 

 

Table  – Pull force and torque.

Mass of appliance (kg)

Pull force  (N)

Torque  (Nm)

≤1

30

0.1

> 1 and ≤4

60

0.25

> 4

100

0.35

 

Test procedure:

 

1. Press the “START” button, the pull force testing begins, after it reaches to the preset test times, the torque weight will be released automatically, and then the torque testing begins. After it reaches to the preset twist time, manually lift the torque weight, then the pull force and torque testing is completed.

 

2. Measure out the distance between the mark and the cord anchorage, the distance subtract 20mm is the pull out length after the test.

 

3. When process the next test, must press the “RESET” button before starting the test, or the test device will not work.

IEC60335-1:25.15 Electrical Appliance Tester Power Cord Strain and Twist Tester 0

IEC60335-1:25.15 Electrical Appliance Tester Power Cord Strain and Twist Tester 1

 

IEC60335-1:25.15 Electrical Appliance Tester Power Cord Strain and Twist Tester 2

 

Contact Details
Guangzhou HongCe Equipment Co., Ltd.

Contact Person: sales

Tel: +8618826455520

Send your inquiry directly to us
Guangzhou HongCe Equipment Co., Ltd.
BLDG D2, Jinhe Industrial Park, Dashi Street, Panyu, Guangzhou, Guangdong
Tel:86--17724266108
Mobile Site Privacy Policy China Good Quality IEC Test Equipment Supplier. © 2014 - 2021 iectestingequipment.com. All Rights Reserved.