Tel:
Guangzhou HongCe Equipment Co., Ltd.
Guangzhou HongCe Equipment Co., Ltd.

We provide you with industry leading test equipment,

advanced online system and solutions–anywhere in the world.

 

Home ProductsImpact Testing Machine

IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory

IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory

  • IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory
  • IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory
  • IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory
  • IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory
IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory
Product Details:
Place of Origin: China
Brand Name: HongCe
Certification: TUV、ITS、CSA、BV、SGS 、CNAS(cost additional)
Model Number: CSH-1
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiatable
Packaging Details: Plywood
Delivery Time: 25 days
Payment Terms: T/T
Supply Ability: 15 sets per month
Contact Now
Detailed Product Description
Accuracy: 0.01J The Maximum Measuring Range: 0-2J
Impact Energy: Max. 2J Diameter Pendulum: 20mm
High Light:

impact test machine

,

pendulum impact testing machine

Calibration Device For Spring Hammer Calibration Apparatus
 
 
Product details:
As the requirements shown in the IEC60068-2-75, this calibration device is used to test the impact energy of the spring hammer. It is the special equipment for the laboratory.

Because it is difficult to measure directly for the offered energy of the calibrated spring hammer, the calibration principle of this device is by comparing the energy which is calculated by the mass of the pendulum and drop height.

The highest resolution capability of this device is 0.01J. The release mechanism is improved in the design, it can maximum reduce vibration affect on the test when the the spring hammer lease, the pendulum rod and aerospace bearing are made of imported good quality steel, so that to improve the precision and stability of the device.

The highest resolution capability of this device is 0.01J. The release mechanism is improved in the design, it can maximum reduce vibration affect on the test when the the spring hammer lease, the pendulum rod and aerospace bearing are made of imported good quality steel, so that to improve the precision and stability of the device.

 
Technical parameters:

Accuracy 0.01J
The maximum measuring range 0-2J
Impact energy Max. 2J
The weight Copper weight cover(2J)
Guide groove diameter 51mm
Pendulum Steel
Diameter pendulum 20mm
Length pendulum 635mm ± 2,5mm
Pendulum H 120mm ± 2mm
Pendulum D 20mm ± 0,5mm
Pendulum W 4mm ± 0,01mm
The energy loss of the pendulum <0.002J
Release device Ac. Mechanic
Trigger distance >30mm
Reference IEC 60068-2-75 fig. B1

 
Procedure for the calibration of spring hammers:

B.1 Principle of calibration

The principle of this calibration procedure is to compare the energy provided by a spring hammer, which is difficult to measure directly, to the energy of a pendulum, calculated from its mass and height of fall.

 

B.2 Construction of the calibration device

The assembled calibration device is shown in figure B.1. Apart from the frame, the main parts are a bearing “a”, a drag pointer “b ”, a pendulum “c”, a release base “d” and a release device “e”.

The main part of the calibration device is the pendulum “c” shown in figure B.2. To the lower end of this pendulum is fixed a steel spring with the details shown in figure B.3. The spring is of spring steel, requiring no special treatment, and is rigidly fixed to the pendulum “c”.

Figure B.4 shows some parts on a large scale

 

It should be noted that this spring is designed for calibrating spring hammers having characteristics as defined in table 1 for energy values equal to or less than 1 J. For calibrating spring hammers having characteristics as defined for 2 J, the spring of the pendulum of the calibrating device would need to be of a different design.

 

In order to obtain suitable friction characteristics of the pointer, a piece of thick woven cloth is placed between the metal surfaces of the bearing, the piano wires being bent in such a way that a small force is exerted against the cloth.

Because the release device is removed during the calibration of the calibration device, the release device is fixed to the release base by means of screws.

 

B.3 Method of calibration of the calibration device

The calibration of the calibration device is effected by using a calibration striking element “g” taken from a spring-hammer, as shown in figure B.5. Before calibration, the release device is removed from the calibration device.

 

The calibration striking element is suspended by four linen threads “h” from suspension points situated in a horizontal plane, 2000 mm above the point of contact between the pendulum and the calibration striking element when the latter is in its rest position. The calibration striking element is allowed to swing against the pendulum and the point of contact under dynamic conditions, point “k”, shall be not more than 1 mm below the point of contact in the rest position. The suspension points are then raised over a distance equal to the difference between both contact points.

 
IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory 0
IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory 1
IEC60068-2-75 Spring Hammer Calibration Apparatus For Laboratory 2
 
 
 
 

Contact Details
Guangzhou HongCe Equipment Co., Ltd.

Contact Person: sales

Tel: +8618826455520

Send your inquiry directly to us
Guangzhou HongCe Equipment Co., Ltd.
BLDG D2, Jinhe Industrial Park, Dashi Street, Panyu, Guangzhou, Guangdong
Tel:86--17724266108
Mobile Site Privacy Policy China Good Quality IEC Test Equipment Supplier. © 2014 - 2021 iectestingequipment.com. All Rights Reserved.