Thanks for the delivery and of course for the equipment itself.
The shipment went well and the test-equipment is now here and ready to be used (see picture).
First impression is very good and installation as well as first test run were successful.
Even the swiss plug has been assembled at the power cord. :-)
—— Mr. Martin Kaempf
Dear Anglia,
Thanks for your e-mail!
Yes, we received the Impact hammer 2 days ago! It seems to working well ;)
If there are any further requests, by our side, we will contact you again!
—— Dirk Fleischer
Shipment and delivery went without issue. Equipment is well-constructed and professional looking.
It performs as specified.
Thank you for all of your help, it was a pleasure working with you.
—— Brian Schroeder
Dear Lily,Thanks for your mail and follow-up!Yes, the products are fine, thanks!Have a nice weekend
50A / 20A Power Line Tester Compression Testing Machine IEC / UL Product information: This device is designed according to the relevant technical requirements of IEC, UL, and related technical requirement of ... Read More
Cold Bending Test Machine HDX1307 Technical parameters: Station:2 Diameter of samples:2.5mm ~12.5mm The number of turns:2 to 10 turns, and the number of turns shall be as specified in the following table: ... Read More
Oxygen (Air) Bomb Aging Chamber Product information: This aging tester conforms to the standard requirements of GB/T2951.12-2008 and GB/T50132008 as well as VDE. It is applicable for the aging test of the ... Read More
IEC 60884-1 Clause 23.4 Plug Socket Tester Power Cord Flexing Test Apparatus 6 Stations Standard description(IEC60884-1 clause 23.4): 23.4 Non-rewirable plugs and non-rewirable portable socket-outlets shall be ... Read More
Flexible Cables Flexing Tester Product information: This cable tester is designed and manufactured in accordance with the standard requirement of IEC60245.2 clause 22.7. It is used for checking mechanical ... Read More
High Voltage Flexible Cable Testing Equipment Flexing Tester AC 380V / 50HZ Product information: This cable tester is designed and manufactured in accordance with the standard requirement of IEC60245.2 clause ... Read More
IEC 60884-1 Power Cord Flexing Tester 10-60rpm Flexing Rate 6 Working Stations Standard: IEC 60884-1 2013 clause 23.4 and figure 21, UL817, VDE0620 Application: This device is used for test the flexing ... Read More
IEC60884 Clause 24.4 Testing Device For Checking The Impact Resistance At Low Temperature Test Apparatus Standard: IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on ... Read More
IEC 60884-1 Figure 21 Plug Socket Tester Power Cord Flexing Tester 10~60rpm Product Introduction: The plug cord flexibility test apparatus is designed and manufactured according to the standard requirement of ... Read More